 |
|
Back to
Enclosure ConstructionOctober 1999
October 21 October 18 October 12 October 8
|
Photos by John Hill |
|
 |
 |
| Looking at the front side of the rotating building. | Looking west at the SMT through a ventilation door. |
 |
 |
| View of peak 10516 to the north of LBT. | Siding installation begins on the shutters. |
Top|
Photos by Carol Evans |
|
 |
 |
| EMCO crew hanging siding on rotating enclosure. | Finish work on the concrete Pier Cap. |
 |
|
| Don Ferris and Jim Slagle from the LBT Project Office. | |
|
Photos by Jim Slagle & Lori Stiles |
|
 |
 |
| View along the LBT access road. | Siding installation on the rear of the LBT enclosure. |
 |
 |
| Looking up along the elevator shaft at the rear of the LBT enclosure. | Installing the drainpipe for the roof drains. |
 |
 |
| Looking up at the left shutter of the LBT enclosure. | Jim Slagle (LBT Asst. Director), Jose Teran U. (Architect from M3) and John Waack (LBT Mountain Operations Manager). |
 |
 |
| The back wall of the observing chamber with the ventilation door slightly open. | EMCO workers carrying a sheet of siding. |
 |
|
| Siding installation on the rear of the LBT enclosure. | |
|
Photos by John Hill |
|
 |
 |
| Looking down on the concrete surface of the Pier Cap. | Looking north toward peak 10516. |
 |
 |
| Looking at the rear side of the rotating building. | Wide view from the roof of the VATT. |
 |
 |
| Narrow view from the roof of the VATT. | Tall view from the roof of the VATT. |
 |
|
| Narrow view from the roof of the VATT. | |
 |
|
 |
|
- © 2004 Large Binocular Telescope Corporation
 |
|
