 |
|
Back to Telescope ConstructionJune 2002
| June 28 |
Photos by Enrico Brunetti and Luciano Miglietta |
 |
 |
| The now-empty factory where LBT was pre-built in Italy. | |
| June 25-27 |
Photos by Enrico Brunetti and Luciano Miglietta |
 |
 |
| Mirror Cell boxes waiting in Milan in the Ansaldo-Camozzi yard. | Other boxes waiting in the Ansaldo-Camozzi yard. |
 |
 |
| Primary Mirror Cell box on the Fagioli truck. | The convoy leaves the Ansaldo-Camozzi yard at night. |
 |
 |
| Pulling onto Viale Sarca past the Breda entrance gate. | A C-Ring box joins two Mirror Cells in the convoy to Cremona. |
 |
 |
| On the road from Milan to Cremona. | Loading the river barge in Cremona. |
 |
 |
| The barge "Ticino" will carry the boxes down the Po River from Cremona to Mestre (near Venice). | This box holds one of the C-Rings. |
| June 5-10 |
Photos by John Hill |
 |
 |
| Lifting the Azimuth Ring sectors off the packing crates on Mt. Graham. | Inspecting the Azimuth Ring sectors. |
 |
 |
| Control box for one pair of the enclosure bogie drives. | |
 |
 |
| Emergency Stop fiber distribution panel for the enclosure. | Fiber patch panel in the enclosure PLC cabinet. |
 |
 |
| Tim Williams putting a new cable on the crane pendant. | Dan McKenna with the LBT SCIDAR instrument mounted on the 1.8m VATT telescope. |
 |
|
 |
|
- © 2005 Large Binocular Telescope Corporation
 |
|
